Posted on

Here’s a Much Eco-Friendlier Alternative to Your Water Softener

Many people are surprised when they find out water softeners aren’t eco-friendly. They were once welcomed as a good solution for hard water. However, things have changed dramatically.

On average, these units waste about 150 gallons of water each week. Yearly, a single water softener can waste up to almost 8000 gallons. This puts a major burden on community water supply lines. And the added sodium is detrimental to septic systems. Sodium is also known to deprive plants from their nutrients.

For these reasons, many have started looking for alternatives. Some states have even banned water softeners. So far, the best one seems to be a water descaler. It’s got many eco-friendly advantages over a softener. Not only that, but it gives you the benefits of soft water without any of the negatives. Today we’ll be exploring all the reasons why you should consider replacing your softener with a water descaler.

A water descaler is easy to install

If you already have a water softener, you probably remember how costly the installation was. Not to mention how much time it took. Luckily, you won’t have to go through the same things with a descaler.

No descaler requires a professional plumber or a complex installation. You just install it, plug it in, and connect the coils to the main pipe. Furthermore, no maintenance whatsoever is required either. Another major advantage is that you have several models that you can research and buy online.

How does a water descaler work?

The descaler’s impulse bands transmit electronic frequencies inside the pipe. These capacitive frequencies directly change the shape of mineral crystals. It’s a process called ionization. After going through this process, the crystals no longer stick to surfaces. As a result, you’ll get no further limescale buildup inside your pipes.

The descaler’s computerized microchip controls how these frequencies act and adapts them accordingly depending on the pressure. Its bands form a frequency field between them, actively treating the water that passes through. In short, water descaler creates an electromagnetic field inside the supply line.

How is a water descaler eco-friendlier?

We talked earlier about how softeners waste water and add sodium. A water descaler requires no salt packs to begin with. It wastes no water because the liquid doesn’t go through a membrane.

But it doesn’t stop here. Descaled water is better at removing soap and shampoo lather. That means you’ll spend less time in the shower and consume less water. The active reduction of limescale also increases the lifespan of your dishwasher and washing machine.

Since there’s no maintenance to speak of, you’ll also save money on plumbing. As a result, your plumber won’t have to use a car to get to your house. And because you don’t need to buy any extras, you’ll also reduce your carbon footprint without even realizing it.

Can the water descaler filter impurities?

No, a water descaler isn’t a filter. It only tackles minerals inside hard water and nothing else. If you have impurities, you’ll still need to get a water filter. Nevertheless, we still recommend pairing a descaler with your filter.

Why? Because hard water is spread throughout the entire country. Sure, it might be in different concentrations, but it is present. If you’ve dealt with it before installing a water softener, you’ll also deal with it after removing it; until you install a descaler.

The bottom line

Water descalers are the much eco-friendlier alternative to water softeners. If you want to tackle the hard water issue without impacting the environment, this is the way to go.